With discount Cheapest Ashampoo HDD Control 3


Cheapest Ashampoo HDD Control 3

You will need just 3 programs for this. One of them is paid, while the other two are available in paid and free version. SSDs do not need to be defragmented. Therefore, if you have only an SSD on your computer or laptop, you do not need any defragmentation software. When you use any computer, you regularly save various files on its disk.

These can be, for example, files created in a spreadsheet, in a graphics program, or in a word processing program. Many files are downloaded from the Internet. Furthermore, most operating systems and most of the software download updates and install them on disk often automatically. Many files are also deleted from the disk or replaced with a newer version. As it is easy to guess, after a few months or a few years all those files may become scattered over your hard drive.

Admittedly, those files can be elegantly arranged in catalogs, but their location on the surface of the disk is not optimal from the point of view of read speed. Hard disk drive HDD consists of plates, on which the head reads and writes data. The disk surface is also divided into sectors of only a few hundred bytes or a few kilobytes. After many cycles of saving and deleting files, there are free spaces between them free sectors.

The next files to be saved go first to the initial free sectors. As a result, the newly installed application can be scattered all over the disk, despite the fact that it is installed entirely in one directory.

With the increasing amount of data flowing through the computer, the degree of scattering of files on the surface of the disk increases. This phenomenon is called fragmentation. Disk defragmentation, in turn, is the process of such ordering files on the surface of the disk, so that all data will be read as soon as possible. The Best Disk Defragmentation Program Over the last few years, I have tested several programs more or less well-known brands for defragmenting disks.

The Degree of fragmentation column shows the degree of fragmentation of files on particular disks. The most favorable value for the user is 0. It may be slightly higher. Generally, the more a disk is fragmented, the slower the entire system will run.

Defragmentation aims to reduce the degree of fragmentation to the lowest possible value. The duration of defragmentation depends to a large extent on the condition usage of the disk, the amount of data being recorded on the disk and removed from it, the performance of the disk, processor and RAM, and the settings of the program used for defragmentation. The only tab I show you here is Automatic defragmentation.

This is the only tab where you need to make minor changes in settings of the program. To enable automatic defragmentation, select all logical discs on the HDD and choose appropriate time interval for fast and for thorough defragmentation.

It can be, just like in my case, one day in case of fast defragmentation and 3 days for thorough defragmentation. During defragmentation, the computer may work significantly slower, but after its completion it will work much faster than it would without defragmentation.

However, one should not set too much time interval between successive defragmentation processes, because it would significantly increase the time needed to perform defragmentation. One of them works great as a free version, the other one should be used in the paid version.

CCleaner This program helps to remove a large part of unnecessary files from the disk and to clear the registry of unnecessary entries. Programs from which unnecessary files can be removed are divided into two categories: Windows and Applications.

Under these two categories, you can select and deselect the data you want to delete or leave on the disk. It is worth, for example, to leave data from web browsers — the history of visited websites, downloaded files, etc. Nobody would rather like to enter all addresses by hand after every use of CCleaner. It is more convenient to use hints based on previously viewed pages.

Then click the Analyze button at the bottom of the window. After a while, a report similar to the one on the above screenshot will appear.

Then press the Run Cleaner button and wait until the process of deleting unnecessary files is over. The window should look more or less like the screen below. The next step is to clear the registry from unnecessary entries.

To do this, go to the Registry tab and click the Scan for Issues button. An example of a registry scan report can be found in the following screenshot. After clicking the Fix associated Issues… button, you will see a window asking to create a backup of the registry.

I never create such a copy and I have never had a problem caused by CCleaner application. For security, however, it may be worth to create a backup. In the next step, click Fix All Selected Issues. Finally, there is an information about successful removal of unnecessary entries. Wise Care Wise Care is the second of the best programs for those who want to speed up a computer using software optimizations. The main window has 5 tabs at the top of the screen.

In the PC Checkup tab, click the Checkup button. After a short analysis, you will see an information about the amount of data to be deleted. Note that despite the earlier use of the CCleaner program, Wise Care still finds a lot of files and registry entries to be deleted.

After clicking the Fix button all issues are solved. Another important tab is System Cleaner. Go to the Common Cleaner subcategory, where in the first place you should view the list of data to be deleted.

As in the case of CCleaner, so this time I recommend not to delete the data stored on the disk by web browsers at least the ones you use regularly. When you click the Scan button, the scan results appear. As you can see, there are quite a few files to delete. Clicking the Clean button removes unnecessary data. Select all available partitions logical drives.

While scanning, you can find hundreds of megabytes of subsequent files to be deleted. Of course, they should be removed with the Clean button. As you can guess, the registry scan will also allow you to find unnecessary entries that you can safely remove without risking system damage.

If any field in the list is unchecked, as in the above screenshot, you can easily select it before deleting entries. So we clean the Windows registry and go to the next stage. If you see any patches that you can apply in your system, click Optimize. The Disk Defrag option in the menu on the left should be omitted. At the beginning of the article, the two most effective defragmentation tools have been described.

As you already know, unnecessary files stored on disk can be easily found and removed. In addition, defragmentation should be performed in the case of magnetic disks — HDD.

The situation with the system registry looks the same — unnecessary entries should be deleted and the register should be additionally defragmented at least once every few weeks.

The analysis of the degree of registry fragmentation usually lasts from a few seconds to several minutes. The computer may not respond during the analysis.

The image is displayed in grayscale, and the system may appear to have crashed. Depending on your hardware, software and condition of your system, the analysis can take up to several minutes. If the computer still does not respond after minutes, you will most likely need to use the Reset button. However, such a situation really happens very rarely.

If you take care of your system by following the advice provided in this article, the analysis of the degree of fragmentation of the register does not exceed a dozen or so seconds! It is worth closing all programs for the time of defragmenting the registry, as the system will have to be restarted. Speedup and Startup tabs contain a list of programs launched at the moment and launched at the start of your system. You can disable the automatic launch of some programs with Windows, which will reduce the load on the disk, CPU and RAM, and thus affect the system operation.

The function that must be turned on is located in the lower left corner of the screen in the PC Checkup tab. You should specify how often and at what time you would like this program to delete unnecessary files. It is best to set the program for daily cleaning at any time. If the computer was turned off at the specified time, cleaning will take place as soon as the system is started. You should also check the Silent mode option. With this function, cleaning will take place fully automatically, and you will be informed about the results using a rectangular small window, which will appear briefly in the lower right corner of the screen.

After cleaning, you may need to restart the web browser. Otherwise, it may not be possible to properly load web pages. How To Speed Up Computer With Hardware Modernization To speed up a computer by changing its hardware configuration, you can replace 3 components that are mainly responsible for the speed of the computer: SSD disks are also much more expensive than HDD disks, but their prices have already decreased significantly.

Solid state drives SSD are available in three formats: My favourite option is the third one. Such a disc is mounted and connected pretty much like a HDD.

Buy cheap Cheapest Ashampoo HDD Control 3

How To Make Computer Faster | AliveBetter

You will need just 3 programs for this. One of them is paid, while the other two are available in paid and free version. SSDs do not need to be defragmented. Therefore, if you have only an SSD on your computer or laptop, you do not need any defragmentation software. When you use any computer, you regularly save various files on its disk.

HOWTO VIDEO:

Ashampoo HDD Control 3 - RedUSERS

Also Buy: Video Converter 5 Best Deal | Siemens Solid Edge ST4 Para La Venta

Tags: ABBYY, VISUAL, OFFICE 2007


Comment It: